These D-Drive Micro Pro's have been combined into the smallest form factor available!
Their compact design was engineered by the development team at ESCape32.org, and it's built with features that allow you to
individually control each axle independently on your HardPark Micro MOA build!
We've taken what they've done, and smashed it together just for you to dominate the micro MOA crawler world!
Now with an integrated 5amp BEC hard-mounted to the ESC, and can now be adjusted thru your Wifi-Link!
With multiple options available at the click of a button, simply choose between 5.5, 6.5, 7.4, & 8.4v.
Which will provide all the power you need for one or even two servos for your next build!
New and Improved!
Now boasting a 5amp BEC for even more power to your upgraded servos!
As well as increased copper content for increased heat dissipation!
PLEASE NOTE!!!
As of 02/01/25, we will no longer be including the Telemetry wire
unless request is made with your order. This is due to most folks not using it
because their Transmitter/Rx is not capable.
ESCape32 firmware Option ONLY:
Support the opensource revolution, and put 32bit technology in the "palm of your hand"! When purchasing this ESC, you are directly supporting the ESCape32.org Project, as we look forward to the capabilities that we can unleash for all BLDC motor control!
This opensource firmware features painless multi-platform access, whether you're at your desktop, laptop, tablet, or cell phone using the ESCape32 Wifi-Link! Cross-platform compatibility is a snap, with no special downloads required, everything you need is accessed thru the Wifi-Link.
Simply connect thru Wifi, and experience even more tuning parameters than other popular 32bit firmware in the palm of your hand. We've added even more tuning parameters to ESCape32, including the new "prot_stall", increasing your current up to 8% more for smoothing out your transition from sine mode to trap mode. Which will provide even more precise motor control and resolution in all points of your throttle. Featuring "bare-metal" based programming, most folks reporting a much more "connected" feel than they've experienced before! All while adding easier access to tuning then the competition! Including custom programmable startup tones that allow you to play your favorite tune, or write your own, by using the native ESCape32 music format. Or by simply uploading your favorite RTTTL ring tone file, that is converted to the native music format.
Features:
• Cross-platform Wifi access on all devices
• Simple "Plug n' Play" access thru Wifi-Link
• Integrated Wifi-Link controllable BEC voltage
• PH2.0, JST, & XT30 Battery Plug Options
• Hi-performance ESCape32 Firmware
• Hard-mounted PH2.0 3pin Motor plug
• Custom programmable startup tones
• Future-proof Wifi-Link programmer compatible (sold separately)
• Sensorless brushless & brushed modes
• Advanced brushed mode settings
• Sinusoidal brushless mode for slow speed crawler control
• Programmable Low-Voltage Cutoff & Drag Brake
• Integrated Voltage Sensor
• Telemetry (KISS, KISS auto, iBUS, S.Port, CRSF)
• Anti-arching and parasitic voltage spike protection
**TVS Diode offers protection against:
1) While plugging in your battery (arching during connection)
2) Rapid motor braking when damped mode is enabled
Specs:
• MCU: STM32G071
• Firmware: ESCape32 "ESCAPE2"
• Voltage: 2-6S (5-6S use external 470uF cap)
• Current: 25A
• Sensors: voltage
• BEC: 5.5/6.5/7.4/8.4V 5A continuous
• Size: 28mm x 12mm x 10mm
Latest ESCape32 Firmware version, settings explained, music files, and more info available here, or within the "More" tab drop-down menu on our home page. Please checkout the new list of "tunes" for your startup tones, to customize your ride even more!
**********
These will be tuned for the Micro Komodo/Nano-Bam size and KV motor,
and is our "Base Tune" we usually ship these with. Further tuning recommended with your Wifi-Link for best performance.
Custom configurations available by request.
